prove logo

PSR2 Reader

PSR2 Reader

The PSR2 (Prove Standard Reader) is a RFID indoor contactless reader. PSR2s are compatible with most Wiegand input control panels as well as Presco and Prescient devices.

  • Configured for enhanced Wiegand compatibility, suitable to replace and upgrade legacy Wiegand only readers

  • In Presco mode the reader can be connected through low cost unshielded cable up to a kilometer away from the controller

  • Automatically senses required output type

  • Audio and visual feedback for all inputs

Suitable for domestic and commercial use
Up to 20cm read range
HID 125kHz compatible
Compatible with Presco and Prescient controllers
Each unit factory tested with 5 year warranty included
Australian design, manufacture and support


operating voltage
9 - 14 Volts D.C.
operating current
150 mA. max
operating temperature
0°C to 50°C
read range
Up to 20cm (8”)
125 ± 5 kHz
wiegand output
Pulse width: 50μs
Pulse separation: 2ms
126mm x 80mm x 17.5mm

Note: Not compatible with pre existing Presco installations configured in Wiegand mode