CR2 Control Relay
The CR2 Control Relay is a 2 pole, double throw device available in a strip of 3 or 6 with common supply rails. The CR2 offers flexibility of use and is a suitable device for multiple applications including industrial uses.
-
Expected lifetime of 100,000 operations at full load
-
LED indication of operation
-
Easy mounting with double sided adhesive tape included as standard
-
2 Amp. rated relay, low 1.2 mA input current
-
In-built -TR pull-up resistor and +TR pulldown resistors
-
2 Pole change over contacts, can jumper +V or –V to common contacts, C1 & C2
-
12 or 24 Volt D.C. operation
Electric door strike control
Dialler interface use
SIU interface strobe lamp driver use
Voltage level shifting applications
Each unit factory tested with 5 year warranty included
Australian design, manufacture and support
Specs
- operating voltage
-
10 - 18V (V Link ON)
21 - 28V (V Link OFF) - Maximum Switch Current
- 2Amp at 30Volts
- +TR Trigger
- 2 to +V, 1.2mA @ 12V, 2.4ma @ 24V
- -TR Trigger
- 0 to (+V -2V), -1.2mA @ 12V, -2.4ma @ 24V
- Life Expectancy
- 100,000 operations at full load
- Dimensions
-
Single Unit: 50mm x 31mm x 15mm
Strip of 6: 50mm x 186mm x15mm
