The PAC2 is a dual door access controller that ensures secure door access due to the separation of the controller from the keypads or proximity readers. The unit can be easily programmed onsite using a keypad or via a PC with a PEL1 or PIM.
Non-volatile memory with 10 year data memory retention
Supports bulk entry programming of users
Automatic door re-lock function
Support for fail safe and fail secure locking
12-24 Volt D.C. or 16-24 Volt A.C. operation
Controls 2 doors
Two Heavy duty 5 Amp relay contacts for lock control
Two 1 Amp N.O. relay contacts for DOTL and Door Forced alarm outputs
Programmable EGRESS input:
-Momentary release for door output
-Hold release for door output
Split system ensures maximum security
Backward compatibility feature for use with the PACDL Datalogger
Multiple configurations of the DTA inputs:
-Dedicated DTA input per door control
-One DTA input to control both doors
-Both DTA inputs to control Door 1 only
- 104mm x 72mm x 27mm
- operating voltage
11 - 30 Volts D.C.
14 - 28 Volts A.C.
- operating current
200 mA. D.C. max
240 mA. A.C. max
- operating temperature
- 0°C to 70°C
- ELC Contacts
- 30 Volts, 5 Amp A.C./D.C. Single Pole Single Throw Programmable as N.O. or N.C.
- DOTL Contacts
- 30 Volts, 1 Amp, N.O. Single Pole Single Throw