PSC2 Keypad/Reader
The PSC2 (Prove Standard Combo) is a RFID reader and keypad. With minimalist aesthetics for interior installation and use in mind, the PSC2 is compatible with EM & HID 125kHz proximity cards and fobs.
-
Up to 20cm read range
-
Automatically senses required output type
-
Configured for enhanced Wiegand compatibility, suitable to replace and upgrade legacy Wiegand only readers
-
In Presco mode the reader can be connected through low cost unshielded cable up to a kilometer away from the controller
-
Audio and visual feedback for all inputs
Suitable for domestic and commercial use
19 million possible combinations
Locator pip for visually impaired
Compatible with Presco and Prescient controllers
Each unit factory tested with 5 year warranty included
Australian design, manufacture and support
Specs
- operating voltage
- 9 - 14 Volts D.C.
- operating current
- 150 mA. max
- operating temperature
- 0°C to 50°C
- read range
- Up to 20cm (8”)
- frequency
- 125 ± 5 kHz
- wiegand output
-
Pulse width: 50μs
Pulse separation: 2ms - dimensions
- 126mm x 80mm x 17.5mm
- weight
- 145g
Note: Not compatible with pre existing Presco installations configured in Wiegand mode