prove logo

PSK2 Keypad

PSK2 Keypad

The PSK2 (Prove Standard Keypad) is for use in indoor access control applications. Intended for sites where two part keypad security is desired, but weather and vandal resistance are of lower priority.

  • Uses Presco data format, capable of utilising low cost, non-shielded cable while communicating up to 1 kilometer from the door controller (power supply and cable dependent)

  • Compatible with Presco and Prescient access controllers

  • Audio and visual feedback for all inputs

  • Tactile membrane with raised buttons, built for longevity

Suitable for domestic and commercial use
19 million possible combinations
Locator pip for visually impaired
Compatible with Presco and Prescient controllers
Each unit factory tested with 5 year warranty included
Australian design, manufacture and support


operating voltage
7 to 15 Volts D.C. current limited to 23 mA (supplied by Presco decoder)
operating current
23 mA. max
0.3 mA in standby
operating temperature
0°C to 70°C
126mm x 80mm x 17.5mm